January 15, 2021

A guide to help you check for your electronics

Pin It

Your home has an electrical power system, but are you keeping an eye on it? The electrical system needs high maintenance as it defines the safety of your place. With even a teensy bit of negligence, you can encounter severe results. To be absolutely sure of your home’s safety, what you need is a residential electrical installation condition report.

You need to keep an active check on your electrical connections and equipment and take preventive measures in case of any damage. It will help you prevent any signs of unexpected problems such as fires or power outage.

Here is a brief guide to help you check your electrical devices on a regular basis.

Visual inspection

The most crucial step is to inspect your electrical system visually. This literally means looking for any warped wires or damaged sockets. Here a few things you need to be aware of:

Damaged cable sheath

Inspect your wires carefully and check if there is any damaged insulation or visible inner cables. Replace the insulation immediately.

Damaged plug

Make sure your plugs are in the right condition. Any impaired plug casing can be extremely dangerous. Also, check if the wires are properly insulated

Damaged casing

Inspect your electrical devices thoroughly and make sure all the casings are in perfect condition. Any exposed wires pose a serious threat, especially in homes with toddlers.

Unsafe connections

In case of wire extensions, make sure the connections are properly secured in plastic casing, and no wires are popping out of their insulation.

Worn out cable grip

Make sure the wires are inserted securely into the cable casing. Many a time, exposure of wires at point of insertion let out a spark and poses a danger to the handler.

Detached earth connection

You need to be careful while checking your wiring. Make sure all electrical appliances are correctly earthed.

Socket overload

Generally, people try to insert as many connections in one extension board as possible. Avoid overloading at all costs. Otherwise, there are higher chances of short-circuiting. An overloaded socket might cost you more than just a spark as it may lead to your devices being shut down at unexpected times.

Moreover, people often plug in multiple devices in one plug. This is extremely dangerous. You need to have a separate plug for all your electrical appliances to keep them safe and free from damage.

Unsuitable environment

You need to have a proper environment for any of your electrical instruments. Don’t keep them in damp or wet areas. Potential interaction between electricity and water has higher chances of extreme electrical hazards.

Moreover, do not use cables or extension boards outside where there’s a chance of rainfall. Make sure your wires are in a safe place and do not let any electrical wires lie in an area with people roaming about. Do not run any cords under rugs or carpets as there is a higher tripping hazard.

Ensure you are not putting any heavy furniture over your wire as it might damage the cords and result in extreme conditions.

Your home is your safe zone, so you need to ensure that nothing hinders the secure feeling it delivers.

Print Friendly, PDF & Email
About ieyenews

Speak Your Mind

*